29 / 65
www.wireless-tek.com
Pic 28 MAC auto bind page
6、MAC filter
（1）MAC filter configuration page
Figure 29 shows the MAC Filter Configuration page. This page is used to configure the
port to filter the MAC address.
The MAC address on the page is used to enter the filtered MAC address. The VLAN ID
entry is used to enter the VLAN to which the MAC address belongs.
Pic 29 MAC filter configuration page
（2）MAC auto filter page
Figure 30 shows the MAC filter automatically convert the page. This page is used to
implement the port automatically bind MAC address.
Display the dynamic MAC address and VLAN associated with the port in the Layer 2
hardware forwarding table. You can select an entry and convert it to a static filter configuration.
To Next Page
Loading...
