46 / 65
www.wireless-tek.com
Pic 46 host static route configuration page
12、AAA configuration
（1）Tacacs+configuration page
Figure 47 shows the Tacacs + configuration page. The user can configure information
related to Tacacs +. The following information can be set: Enable Tacacs + function, configure
the Tacacs + server IP address, authentication type, and shared secret key.
Before using the Tacacs + function, you must enable the Tacacs + function, which is
configured by default.
Configure the IP address of the Tacacs + server, which must be set when using the
Tacacs + feature.
Authentication type, providing PAP and CHAP authentication types. The default is PAP
authentication.
Shared key, used to set the switch and Tacacs + server between the encrypted shared
password, in the authentication authorization must set this field, and to the same as the
Tacacs + server settings.
To Next Page
Loading...
