15 / 65
www.wireless-tek.com
Pic 11 Multi-user management configuration page
（4）User safety configuration page
Figure 12 shows the user safety configuration page, through the configuration of the page,
the administrator can control the network management services TELNET, WEB and SNMP
control, you can open or close these services,These services can be linked with the IP
standard ACL group, the implementation of source IP address control, control the host access
to these services.
Switch by default TELNET, WEB and SNMP services are open, and do not do ACL
filtering, that is, all the hosts can access the switch of these three services.If the administrator
for security, do not want to provide other users one or several of these services, can shut down
one or more of these services.Administrators only want a specific host to access one or more
of these services, can one or several of these services do ACL filtering.When a service needs
to do ACL filtering, you need to open the service and select an IP standard ACL group (1-99).
The ACL group must exist.
It should be noted that if the administrator on this page to control the WEB service (such
as the closure of WEB services) may make users can no longer use the WEB page,At this time
through other ways to log on the switch and control WEB services so that users can use the
WEB page (such as open the WEB service).
To Next Page
Loading...
