6400 Reference Manual
8
6400 Analyzer
The analyzer is used to measure voltage or mA signals coming from a sensor or transducer and translating it
into useful data by converting it into calculated values for determining the health and performance of the
machine being measured.
Windrock analyzers come in several configurations ranging in complexity depending upon the types of
machinery to be tested and data to be collected:
- 6400 / CA 1-channel engine power cylinder balancer and ignition analyzer
- 6400 / MA 2-channel reciprocating machinery maintenance analyzer
- 6400 / DA 2-channel diesel engine analyzer
- 6400 / PA 4-channel performance analyzer
- 6400 / VA 4-channel vibration analyzer
Note: The MA, DA, and PA have the capability to add the VA (vibration) option to their current configuration
which provides additional vibration (FFT) data collection capabilities.
Note: The number of channels and options your analyzer has available will vary based on the specific model of
analyzer that you have.
To Next Page
Loading...