WingtraOne QX1 Test Pictures in Preflight Procedure.
WingtraOne takes a series of test pictures after you press the Ready-to-Fly button during the preflight procedure to check if the camera is setup correctly, i.e. to make sure
that the SD card is inserted correctly and triggering from the autopilot is possible. Listen to the camera after you press the Ready-to-Fly button. If you hear the shutter
opening and closing (clicking sound) you can be sure that everything works fine. If you run into trouble, check the WingtraOne QX1 Troubleshooting Section before
submitting a support request.
To Next Page
Loading...
