WisyCom MCR54 - Page 16

MCR54 / MCR54-DUAL User Manual
15
With IKSS it is possible to enable Digital outputs on TOP or BASE. If the outputs are digital it is
possible to come out all the receivers with one connector while in analog mode TOP connector can
comes out receivers (A1, A2) or (A3, A4) while BASE connector can only provide receivers (A1, A2).
TOP output
BASE output
2 CHANNEL1+
3 CHANNEL1-
15 CHANNEL2+
16 CHANNEL2-
1 GND
2 CHANNEL1+
3 CHANNEL1-
4 CHANNEL2+
5 CHANNEL2-
CH1
CH2
CH1
CH2
A3
A4
A1
A2
D1, D2
D3, D4
A1
A2
D1, D2
D3, D4
A3
A4
With SX it is possible to enable Digital outputs only on TOP connector. If the outputs are digital it is
possible to come out all the receivers with one connector while in analog mode TOP connector can
comes out the couple (A1, A2) or (A3, A4). BASE connector can only comes out (A1, A2) receivers.
TOP output
BASE output
2 CHANNEL1
3 CHANNEL2
1 GND
2 CHANNEL1+
3 CHANNEL1-
4 CHANNEL2+
5 CHANNEL2-
CH1
CH2
CH1
CH2
A1
A2
A1
A2
A3
A4
D1, D2
D3, D4