Headphones
This menu the user can select which of the 4 receivers he wants to listen to and can adjust the
volume from 0 to -24 step 1dB.
Display
In this menu item it’s possible to set the mode of switch on of the front LEDs and the contrast and
timeout of the display.
LEDs mode can be:
• Full: all LEDs are activated
• Alarm: the LEDs are ON only in case of alarm (only red)
• OFF: all LEDs are always off
Low timeout indicates the time until the display stays on with the contrast set (after which, the
display contrast is lowered and after another “Low timeout” the display shows the Status screen).
Off timeout is the time until the display stays on (after which, the display will automatically turn
off). If Off timeout is set to OFF the display never turn off automatically.
Act. code
This section allows to insert the activation code for a compander enabling.
Panel lock
By activating this function, it is possible to lock device parameters. Doing this permits to access the
menu and read what it’s selected without modify any parameter.
fn. Menu
This feature allows to select to which parameter accede with the shortcut combination of pressing
“Up and Down” arrows together:
▪ Audio: that goes to “Audio route” menu;
▪ BT: that goes to “Bluetooth” menu;
▪ ActRX: that goes to “Active Rxs” menu.
To Next Page
Loading...
