Active RXs
Allow to enable/disable each single receivers.
Bluetooth
Pairing: per accoppiare con dispositivo cellulare, tablet etc. Quando accoppiato è possibile editare i
parametri altrimenti si può solo vedere delle info
Passcode: per impostare una password
Reset: per resettare gli accoppiamenti bluetooth
Audio Route
MCR54 provides two audio output: Base & Top. Depending on the rear panel mounted it is
possible to have different scenarios.
Rear panels:
▪ BPA54: stand-alone rear panel;
▪ SX: Sony cameras rear panel;
▪ IKSS: Ikegami/Panasonic cameras rear panel;
▪ MRK16: Wisycom 16 channels receiver.
This menu allows to decide the type of audio outputs (Digital AES3 or Analog) and what receivers
come out to the connectors.
Depending on the plugged slot-in it can be configured according to the following tables.
With BPA54 it is possible to enable Digital outputs on TOP or BASE#1. If the outputs are digital it is
possible to come out all the receivers with one connector while in analog mode each connector can
comes out the couple (A1, A2) or (A3, A4).
To Next Page
Loading...
