WisyCom MCR54 - Page 6

MCR54 / MCR54-DUAL User Manual
5
Audio Layout
As shown on the above schematic, MCR54 provides the following audio signals:
• HP [HEADPHONE]: an analog monitor audio output to headphone 3.5mm jack socket.
Thanks to the “Setup>Headphone” menu the user can select which of the 4 receivers he
wants to listen to and can adjust the volume from 0 to -24 step 1dB.
• BOT [MAIN]: 4 audio signal streams come out in the connector on the bottom and
depending on the plugged slot-in can be configured according to the following table:
SLK54 - IKSS/SX
BPA54
CH1
CH2
CH1
CH2
CH3
CH4
A1
A2
A1
A2
A3
A4
D1, D2
D3, D4
D1, D2
D3, D4
A3
A4
• TOP [AUX]: 2 audio signal streams come out in the TA5 top feed connector and can be
configured in digital (enabling AES3 on AUX outputs) or in analog:
TOP
CH1
CH2
A1
A2
A3
A4
D1, D2
D3, D4