TECHNICAL SPECIFICATIONS
Dimensions
Printer: (x)505 x (y)388 x (z)450 mm
Print area: (x)297 x (y)210 x (z)200 mm
Box: (x)622 x (y)524 x (z)624 mm
Mechanics (general)
Powder-coated steel chassis
Toughened chrome bars for the X, Y and Z carriages
Igus bushing for X, Y and Z
Igus E-chains
Igus screw drive for the Z axis with exible motor coupling
Powder-coated steel supports and moving parts
3-point cushioned levelling system for the print base
Quick-change print base system with neodymium magnets
Layer resolution
Very high: 50 microns
High: 100 microns
Medium: 200 microns
Low: 300 microns
Mechanics (extruder)
Own-design extruder
0.4 mm nozzle
Refrigeration nozzle for cooling parts
Print speed
Recommended speed: 50 mm/s
Maximum recommended speed: 80 mm/s
To Next Page
Loading...