witbox bq User Manual

6
ENGLISH
What is a 3D printer?
A 3D printer is a device that is capable of creating solid, three-dimensional
objects using a design produced on a computer. Currently, there are various
technologies that make this possible. The Witbox uses the method known as
Fused Filament Fabrication (FFF), which builds objects by adding one layer of
melted polymer lament on top of another until the item has been completed.
Online resources for the Witbox
You can nd the most up-to-date version of this manual in electronic format on
our website:
www.bq.com/gb/downloads-witbox.html
We have also provided a series of instructional videos that will help you get the
most out of your Witbox desktop printer:
www.bq.com/gb/products/witbox.html

witbox bq Specifications

General

Build Volume	297 x 210 x 200 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	SD Card
Display	LCD
Print Technology	FDM (Fused Deposition Modeling)
Layer Resolution	50 to 300 microns
Supported Materials	PLA
Frame Material	Steel
Power Supply	100-240V, 50-60Hz