Need help?Do you have a question about the witbox bq and is the answer not in the manual?
Lists all included items and advises checking for missing parts to ensure a complete package.
Details the steps for safely removing the Witbox printer from its packaging and protective materials.
Instructions on how to attach the side panels to the printer using the provided Allen key.
Guide on positioning and securing the top panel onto the printer using screws.
Instructions for placing the glass print base onto its magnetic support inside the printer.
Describes how to attach the spool holder to the printer rear and place the filament spool.
Details how to connect the power cable to the printer and plug it into the power socket.
Details the critical process of levelling the print base for optimal object adhesion and print quality.
Step-by-step guide to load filament, including extruder heating and initial extrusion.
Instructions on selecting and printing a test object from the pre-loaded SD card.
Guides on downloading, installing, and finding preconfigured resources for Cura software.
Details the wizard steps for configuring Cura with specific Witbox machine settings.
Steps to print a 3D object by selecting a file from the SD card via the printer's menu.
Lists essential safety precautions to observe during Witbox operation, handling, and environment.
General| Build Volume | 297 x 210 x 200 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | SD Card |
| Display | LCD |
| Print Technology | FDM (Fused Deposition Modeling) |
| Layer Resolution | 50 to 300 microns |
| Supported Materials | PLA |
| Frame Material | Steel |
| Power Supply | 100-240V, 50-60Hz |
To Next Page