PARTS
Moulder Cutter
9
9-7 WMMdoc042320 PARTS
14 WASHER, 8.5 ZINC FLAT SPECIAL F81054-11 2
15 KNOB, SR50/M8x25 (466406 MOSS) 500973 2
16 HANDLE, EPR.90-PF-C1(261051-C1) 100012 1
17 WASHER, 13 FLAT ZINC F81056-1 8
18 NUT, M12-8 HEX NYLON ZINC LOCK F81034-2 4
19 BOLT, M12 X 35-8.8-FE/ZN5 HEX HEAD FULL F81004-24 4
20 SWITCH, AZ17-11ZRK SAFETY 094232 1
21 SCREW, M4x35-8.8 HEX SOCKET HEAD CAP ZINC F81011-34 2
22 WASHER 4,3 FE/ZN5 PN-M/82005 F81051-2 2
23 NUT M4-B FE/ZN5 PN-M/82175 F81029-1 2
24 PLATE, MOULDER HOUSING 530175-1 1
25 WASHER, 6.4 FLAT ZINC F81053-1 10
HOUSING, BEARING+ BUSHINGS FYTJ 507 (SKF) 513046 2
26 HOUSING, BEARING FYTJ 35K SKF 513045 1
27 BUSHING R14 11.9X16.8X11 ECOMID 6" SKF 513047 2
28 SLEEVE ADAPTER H 2307 SKF 513386
29 ALIGNMENT TOOLS SET, ELBE RF100120 502848 1
30 WRENCH, BEARING NUT, DIAMETER 53MM 502443 1
To Next Page
Loading...
