Wood-mizer MP100 Series - Page 40

MOULDER ASSEMBLY
Manual Feed Rope Assembly
3
3-20 15doc042320 MOULDER ASSEMBLY
3. Loop the rope around the inner groove of the lower v-groove roller and route to the feed crank spool.
See Figure 3-15.
4. Loop the rope around the feed crank spool three times and route back down to the outer v-groove roller.
See Figure 3-16.
5. Route the rope around the outer groove of the v-groove roller.
FIG. 3-15
FIG. 3-16
150111
150112