To Next Page

To Previous Page

Manual 37240C GCP-30 Series - Genset Control

Using a GSM Modem

≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡

Gateway

GW4B/RS232+LDP

P/N 5448

910

Laptop

with Windows operation system

98SE, NT, ME, 2000, XP,

external modem

LeoPC1 3.1 or higher

configuration and visualization

Control

terminals X1

CAN

Max 250 m

e.g. INSYS

GSM Modem

with discrete input for dial up

232

up to 8

GCPs

can

be connected to the

same CAN Bus

up to 8

GCPs

can

be connected to the

same CAN Bus

Function

It is possible to establish a cellular connection to the system using a GSM modem. This application is intended

for mobile use.

It is also interesting to trigger a call in case of an alarm with this application. The GSM modem provides a dis-

crete input for this, which can trigger e.g. a short message (SMS) (depending on the network provider, it can also

be possible to send a fax message).

Different applications can be performed using the software LeoPC1. These applications include:

• Configuration

• Visualization with data logging

• Remote control (start and stop, transferring the set values for real power and generator power factor)

• Transfer standard values to and from the harddrive

Preconditions for this Example

• GCP with CAN interface (X1/X5)

• GW4B/RS232 LDP

• Wireless modem INSYS GSM 4.0 with antenna (www.insys@insys-tec.de)

• SIM card with data transfer enabled (to be enabled by the GSM provider)

• PC or notebook with Windows OS 98SE, NT, ME, 2000, XP with external analog modem

• Application software LeoPC1 version 3.1 or higher

• Configuration files available (*.cfg, *.asm, *.opt, ...)

• FAX/SMS receiver for receiving alarm messages

Brand	Woodward
Model	GCP-31 Series
Category	Controller
Language	English

Woodward GCP-31 Series User Manual

Table of Contents

Other manuals for Woodward GCP-31 Series

Questions and Answers:

Woodward GCP-31 Series Specifications

Related product manuals