Work Sharp WS1 - Sharpening and Re-sharpening Strokes

16 Work Sharp Knife & Tool Sharpener
SHARPEN RE-SHARPEN
P220
RED
6000
PURPLE
P220
RED
6000
PURPLE
×
10
×
10
×
2
×
10
Step 4
Remove red belt, install purple belt. Hone knife. Repeat Steps 2 &
3 alternating evenly until knife is honed (5 strokes per side, 10 total
strokes).
NOTE: When re-sharpening, use the red belt for 1 to 2 strokes per
side, then the purple belt for 5 honing strokes per side.
Belt: 6000 PURPLE
Step 3
Repeat Step 2 now
using the left side of
guide. Repeat steps
2 and 3 for 5 strokes
per side (10 total
strokes).
Your knife should now be “tomato sharp”.
If you choose, you can proceed with the purple 6000
grit belt and hone the edge for even sharper results!