What to do if my knives are cutting into Work Sharp WS1 sharpening guides?
If your knives are cutting into the sharpening guides, use much lighter pressure. Best results are achieved by using only the weight of the blade while in the sharpening guide.
How do I check for a burr on Work Sharp WS1?
To check for a burr, slide your finger perpendicular and away from the cutting edge. The burr will feel like a small ‘ridge’ or ‘wire’ at the edge.
How to prevent knife tips from rounding when using Work Sharp Accessories?
To minimize rounding of knife tips, avoid stopping the tip on the belt while powering down the Work Sharp tool. Also, ensure you keep the blade edge perpendicular to the belt during sharpening.
General warnings for safe operation of power tools, including work area and electrical safety.
Guidelines for user safety, including alertness, safety equipment, and proper dress.
Instructions on correct usage, maintenance, and storage of the power tool.
Specific safety rules like wearing eye protection and handling dust.
Explains safety symbols and definitions used in the manual.
Guidelines for selecting and using appropriate extension cords.
Outlines the recommended applications for the Work Sharp Knife & Tool Sharpener.
Lists applications that are not recommended for the tool.
Provides solutions for common problems encountered during use.
Offers advice on optimal methods for sharpening.
Step-by-step instructions for preparing the sharpener for use.
Details on abrasive belt dimensions, weight, and how to obtain replacements.
Specifies the number of strokes required for sharpening and re-sharpening kitchen knives.
Specifies the number of strokes for sharpening and re-sharpening outdoor knives.
Overview of the product warranty terms and conditions.
General| Brand | Work Sharp |
|---|---|
| Model | WS1 |
| Category | Accessories |
| Language | English |
To Next Page
