User’s Guide 25
Step 1
NOTE: Some tools require the blade to be
inserted through the grinding frame opening
(as shown) to allow belt access to the cutting
edge.
Repeat 2 to 4 strokes or until you are satisfied with the sharpness.
NOTE: These tools usually have only one sharp, beveled blade.
Re-sharpen ONLY the beveled blade. These tools do not
require sharpening to a precise angle; just let the belt conform to
the edge of the tool.
Remove guide, install red belt; move sharpening
cassette to grinding position B.
Clamp pruners in a
bench vise.
Step 2
Belt: P220 RED
Sharpening Tools
Pruners, Shears, & Other Bypass Cutting Tools
12
To Next Page
Loading...
