User’s Guide 23
Magnet
Scissor
Guide
Pull scissors
steadily through guide
along full length of blade.
NOTE: proper scissors-sharpening position.
Place scissor blade in guide slot all the way
to the hinge. Guide magnet will help keep
the blade flat and stable during sharpening.
Repeat Step 2 about 5 times or until black marker
is sharpened off at the cutting edge.
Repeat Steps 1 to 3 on other scissors blade. Test
scissors, repeat as needed.
NOTE: Sharpen only the beveled side of your scissors; marking the beveled
side with a black marker will make it easier to see when the cutting edge has
been sharpened.
Install the red P220 belt and
the outdoor knife guide (includes
scissor guide).
Hold scissors as shown
to keep blades open
during sharpening.
Belt: P220 RED
Step 1
Step 2
Step 3
Step 4
Sharpening
Scissors
10
To Next Page
Loading...
