Work Sharp WS1 - Sharpening Single-Bevel Knives; Filet Knives

22 Work Sharp Knife & Tool Sharpener
Step 1
Step 2
Step 3
Install purple belt and hone
beveled side of the blade; continue
using the outdoor knife guide
Follow instructions for smooth-edged knives on the
beveled side of the blade using the outdoor knife
guide and the red P220 belt. Continue until a slight
burr develops on the flat side (usually 5 strokes.)
TIP: It may be necessary to repeat this
alternating process of bevel sharpening
and back honing to achieve the sharpest
results (no burr).
Hone flat side of the blade
using the serrated guide;
continue using the outdoor
knife guide.
Belt: 6000 PURPLE
Belt: P220 RED
Sharpening Single-Bevel
Knives / Filet Knives
9