User’s Guide 7
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and belts etc., in accordance with these
instructions and in the manner intended for the particular type of power
tool, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those
intended could result in a hazardous situation.
5) Service
• Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
• Do not dispose of electrical products with household waste.
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
• To replace a damaged power supply cord (Type Y), your power
tool must be returned to the Service Center.
Specific Safety Rules
• WARNING: ALWAYS use proper safety glasses. Everyday eyeglasses
are NOT safety glasses. Also use face or dust mask if operation is dusty.
ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
• WARNING: Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities contains chemicals known
to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to lter out microscopic particles.
Darex, LLC
210 E. Hersey St.
Ashland OR 97520
USA
Industrial Tool & Machinery Sales
18 Business Street
Yatala, Queensland
Australia
More service centers at www.worksharptools.com
Tel.: 1 (800) 597-6170
Fax.: 1 (541) 552-1377
E-mail: info@darex.com
Internet: www.worksharptools.com
Tel.: 61-7-3287-1114
Fax.: 61-7-3287-1115
E-mail: sales@industrialtool.com.au
Internet: http://www.industrialtool.com.au
To Next Page
Loading...
