24 Work Sharp Knife & Tool Sharpener
Step 1
Clamp tool to be
sharpened securely
in bench vise.
Squeeze power switch; grind edge of tool
until you are satisfied with the sharpness.
NOTE: Tools such as these do not require sharpening to a precise
angle; just let the belt conform to the edge of the tool. It will
take longer to restore an edge to severely damaged tools.
Remove knife guide,
install green belt;
move sharpening cassette
to grinding position B.
Belt: P80 GREEN
Step 2
Sharpening Tools
Shovels, Hoes, Axes, Pick Axes, Post-Hole
Diggers, & Other Edged Tools
11
To Next Page
Loading...
