wtw Cond 7310 - 3 Commissioning; 3.3 Initial Commissioning

Commissioning Cond 7310
10 ba75933e04 06/2013
3 Commissioning
3.1 Scope of delivery
 Conductivity meter Cond 7310
 4 batteries 1.5 V Mignon type AA
 Power pack
 USB cable
 Stand
 Stand holder
 Comprehensive operating manual
 Short instructions
 CD-ROM with
– USB drivers
– comprehensive operating manual
– software MultiLab Importer
3.2 Power supply
The Cond 7310 is supplied with power in the following ways:
 Mains operation with the supplied power pack.
 Battery operation (4 x alkaline manganese batteries, type AA)
 USB operation via a connected USB-B cable.
3.3 Initial commissioning
Perform the following activities:
 Insert the supplied batteries
 For mains operation: Connect the power pack
 If necessary, mount the stand
 Switch on the meter (see section 4.2 S
WITCHING ON THE METER, page 15)
 Set the date and time (see section 4.4.5 E
XAMPLE 2 ON NAVIGATION: SETTING
THE DATE AND TIME, page 20)