wtw Cond 7310 - Sensor-Independent Settings; System

Settings Cond 7310
32 ba75933e04 06/2013
6.2 Sensor-independent settings
6.2.1 System
To open the Storage & config menu, press the <F1_>[Menu] key in the mea-
sured value display. After completing the settings, switch to the measured
value display with <M>.
Default settings are printed in bold.
Menu item Possible set-
ting
Description
System / General /
Language
Deutsch
English
(further)
Selects the menu language
System / General /
Beep
On
Off
Switches on/off the beep on
keystroke
System / General /
Illumination
Auto
On
Off
Switches the display illumination
on/off
System / General /
Contrast
0 ... 50 ... 100
%
Changes the display contrast
System / General /
Switchoff time
10 min ... 1h
... 24 h
Adjusts the switch-off time
System / Interface /
Baud rate
1200, 2400,
4800, 9600,
19200
Baud rate of the data interface
System /
Interface /
Output format
ASCII
CSV
Output format for data transmis-
sion
For details, see section 8
T
RANSMITTING DATA (USB INTER-
FACE), page 41
System /
Interface /
Decimal separator
Dot (xx.x)
Comma
(xx,x)
Decimal separator
System /
Interface /
Output header
Output of a header for Output
format: CSV
System / Printer Settings for the integrated
printer of the Cond 7310P.
For details, see section 9
PRINTER (ONLY COND 7310 P),
page 43