wtw Cond 7310 - Socket Field; Switching on the Meter

Cond 7310 Operation
ba75933e04 06/2013 15
4.1.4 Socket field
4.2 Switching on the meter
1 Conductivity measuring cell
2 Mini USB-B interface
3 Power pack
4 Service interface
CAUTION
Only connect measuring cells to the meter that cannot return
any voltages or currents that are not allowed (> SELV and
> current circuit with current limiting).
Almost all customary measuring cells fulfill these conditions.
1. Switch the meter on with <On/Off>.
The meter performs a self-test.
The display shows the manufacturer's logo while the self-test is being
performed.
The measured value display appears.
1
2
3
4
ϰ
1417 µS/cm
25.0 °C
[Tr25][nLF][ 0.479 1/cm]
01.07.2011
08:00
Menu USB output