wtw Cond 7310 - 7 Data Storage; 7.1 Manual Data Storage

Cond 7310 Data storage
ba75933e04 06/2013 35
7 Data storage
You can transmit measured values (datasets) to the data storage:
 Manual storage (see section 7.1 M
ANUAL DATA STORAGE, page 35)
 Automatic storage at intervals (see section 7.2 A
UTOMATIC DATA STORAGE AT
INTERVALS, page 36)
Each storage process transmits the current dataset to the interface at the same
time.
7.1 Manual data storage
You can transmit a measurement dataset to the data storage as follows. The
dataset is at the same time output to the interface:
If the data storage is
full
The following window appears if all 200 storage locations are occupied:
You have the following options:
1. Press the <STO> key shortly.
The menu for manual storage appears.
2. If necessary, change and confirm the ID number (1 ... 10000) with
<><> and <ENTER>.
The dataset is stored. The meter switches to the measured value dis-
play.
01.07.2011 11:24:16
ϰ 1415 µS/cm 25.1 °C AR +++
C = 0.479 1/cm, Tref 25, nLF
ID number: 1
Continue
Manual data storage 4 From
01.07.2011
08:00
Back
Data storage full. Erase?
Yes
No
Warning
01.07.2011
08:00
Back