wtw Cond 7310 - 7.2 Automatic Data Storage at Intervals

Data storage Cond 7310
36 ba75933e04 06/2013
 To erase the entire data storage, confirm Yes.
 To cancel the storage process and switch to the measured value display,
confirm No. Then you can e.g. transmit the stored data to a PC (see section
7.3.1 D
ISPLAYING AND EDITING THE MEASUREMENT DATA STORAGE, page 38)
and subsequently erase the storage (see section 7.3.2 E
RASING THE MEA-
SUREMENT DATA STORAGE, page 40).
7.2 Automatic data storage at intervals
The storage interval (Interval) determines the time interval between automatic
storage processes. Each storage process transmits the current dataset to the
interface at the same time.
Configuring the
automatic storage
function
1. Press the <STO_> key.
The menu for automatic storage appears.
1 Adjusted entire storage duration
2 Max. available storage duration
3 Graphical display of the storage usage
1
ID number
1
Interval
30 s
Duration
180 min
Continue
0d03h00min
0 1d17h33min
Automatic data storage
01.07.2011
08:00
2
3
Back