Settings Cond 7310
34 ba75933e04 06/2013
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open it, press the <F1>/[Menu] or
<ENTER> key in the measured value display.
6.3.2 Resetting the system settings
The following system settings can be reset to the default condition:
The system settings are reset in the menu, Storage & config / System / Reset.
To open the Storage & config menu, press the <F1_>[Menu] key in the
measured value display.
Reference temperature 25 °C
Temperature coefficient (TC) of the
linear temperature compensation
2.000 %/K
TDS factor 1,00
Stability control On
Temperature unit °C
Setting Default settings
Language English
Beep On
Baud rate 4800 Baud
Output format ASCII
Contrast 50 %
Illumination On
Switchoff time 1 h
Setting Default settings
To Next Page
Loading...
