Operation Cond 7310
18 ba75933e04 06/2013
Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <ENTER>.
Example: Display the Calibration record function.
Messages
Information is marked by the
i
symbol. It cannot be selected. Example:
4.4.4 Example 1 on navigation: Setting the language
1. Press the <On/Off> key.
The measured value display appears.
The instrument is in the measuring mode.
Language: Deutsch
Beep: Off
Illumination: On
Contrast: 48 %
Switchoff time: 30 min
General
01.07.2011
08:00
Back
Calibration record
Calibration data storage
Calibration interval: 150 d
ϰ
01.07.2011
08:00
Back
Measuring cell
Temp. comp. (TC)
TDS factor 1.00
Stability control On
Temperature unit °C
i
ϰ = 1413 µS/cm
ϰ
01.07.2011
08:00
Back
To Next Page
Loading...
