wtw Cond 7310 - Page 19

Cond 7310 Operation
ba75933e04 06/2013 19
2. Using <F1_>/[Menu], open the Storage & config menu.
The instrument is in the setting mode.
3. Select the System submenu with <><>.
The current selection is displayed with a frame.
4. Open the System submenu with <ENTER>.
5. Select the General submenu with <><>.
The current selection is displayed with a frame.
6. Open the General submenu with <ENTER>.
ϰ
1417 µS/cm
25.0 °C
[Tr25][nLF][ 0.479 1/cm]
01.07.2011
08:00
Menu
USB output
System
Data storage
Storage & config
01.07.2011
08:00
Back
General
Interface
Clock
Service information
Reset
System
01.07.2011
08:00
Back