IQ SENSOR NET MIQ/T2020 Operation
4 - 5
Special displays
4.1.3 Keys
4.1.4 Rotary switch
Init Sensor is being initialized
l during commissioning or
l if a new sensor is identified and this does not yet
provide any measured values
Set Sensor is being set
---- Invalid measured value
Cal Sensor is being calibrated
Error Sensor is inactive or defective
Hold Measured value is frozen
OFL Measuring range is undercut or exceeded (overflow)
Display
flashes
Sensor in maintenance condition
Key Function
m Displays measured values
c Starts calibration
of the sensor selected in the measured value display
s Opens the Settings/Einstellungen menu
e Changes or aborts entries
in the higher menu levels without storing them
g Confirms selection
Rotary
switch
Function
d Highlights and selects:
l Menu items
l Entries
l Columns or fields
l Letters or numerals
To Next Page
Loading...
