Safety instructions IQ SENSOR NET MIQ/T2020
2 - 2
2.1 Authorized use
The authorized use of the MIQ/T2020 consists of its use as a control
unit in the IQ S
ENSOR NET.
Please keep to the technical specifications according to chapter 7
T
ECHNICAL DATA. Only operation according to the instructions in this
operating manual is authorized.
Any other use is considered to be unauthorized. Unauthorized use
invalidates any claims with regard to the guarantee.
2.2 General safety instructions
The MIQ/T2020 is constructed and inspected according to the relevant
guidelines and norms for electronic instruments (see chapter 7 T
ECHNI-
CAL DATA).
It left the factory in a safe and secure technical condition.
Function and operatio-
nal safety
The failure-free function and operational safety of the MIQ/T2020 is
only guaranteed if the generally applicable safety measures and the
special safety instructions in this operating manual are followed during
its use.
The failure-free function and operational safety of the MIQ/T2020 is
only guaranteed under the environmental conditions that are specified
in chapter 7 T
ECHNICAL DATA.
Safe operation If safe operation is no longer possible, the MIQ/T2020 must be taken
out of operation and secured against inadvertent operation.
Safe operation is no longer possible if the MIQ/T2020:
l has been damaged in transport
l has been stored under adverse conditions for a lengthy period of
time
l is visibly damaged
l no longer operates as described in this manual.
If you are in any doubt, contact the supplier of your MIQ/T2020.
To Next Page
Loading...
