page 39 of 84
A3 MEASURING PROCEDURE / GENERAL HANDLING
TYPICAL CONFIGURATIONS WITHOUT RADIO TRANSMISSION
Used as stand alone
instruments not possible as no
display on the instruments.
A BlueMETER BASIC is
needed.
Available sensitivities:
• 1µm/m (0.2 ArcSec)
• 5µm/m (1 ArcSec)
• 10µm/m (5 ArcSec)
Data transmission via cables
Two BlueLEVEL BASIC and one
BlueMETER BASIC
Wireless transmission of the
measuring data (via
Bluetooth™ wireless
technology)
Two BlueLEVEL BASIC with
BlueMETER BASIC and Infrared-
Zapper to initiate the
measurement
Data transmission via cables
to PC/Laptop
Two BlueLEVEL BASIC with
BlueMETER BASIC and
infrared-zapper for triggering the
data transmission
Wireless transmission of the
measuring data (Bluetooth™
wireless technology)
with connection to a PC /
Laptop
Two BlueLEVEL BASIC with
BlueMETER BASIC and Infrared-
Zapper to initiate the
measurement
According to the WyBus compatibility scheme even more than 2 sensors can be connected to a BlueMETER
BASIC. With connection via cables up to 63 sensors and with wireless data transmission up to 15 sensors are
possible. One or two of sensors can be selected for display on the BlueMETER at a time.
To Next Page
Loading...
