46 Freedom SW Owner’s Guide
Configuring the Freedom SW using the SCP
If the problem loads cannot be eliminated, there are two
work-around solutions:
1. Disable search mode from the main Freedom SW Setup
menu, causing the inverter to always remain at full output
voltage.
2. Use a search-friendly companion load whose only
purpose is to be switched on to wake up the inverter to
power the load that is unable to bring the inverter out of
search mode.
NOTES:
• Search mode, by function, cannot work with clocks and timers or
devices that need power 24 hours a day. Examples of devices with
timers include video recorders, coffee makers with brew timers,
refrigerators, and freezers with defrost timers. Examples of devices
that need power 24 hours a day include telephone answering
machines, alarm systems, motion detection lights, and some
thermostats.
• When the inverter is searching the output for loads, lights that have a
wattage lower than this setting may flash momentarily.
FSW Owners Guide.book Page 46 Tuesday, August 7, 2018 9:03 AM
To Next Page
Loading...
Need help?
General
