XCell ATF Series - Page 47

43
XCell
TM
ATF System with C410:V3 Controller
User Guide
Display batch information as in the following screens
Overview of Batch information is shown
The Batch Info Overview screen will display parameters in the following tables:
Field
Description
Batch Data
Displays current Batch information
Elapsed Time
Displays Elapsed time of current batch run. Time is reset by changing
Batch Name.
Cycle Count
Displays Diaphragm Pump Cycle count of current batch run
User ID
Displays Users ID: Engineer or Administrator
Batch Set Up
Set Batch Name and reset Cycle count
Name
Click on field to change batch name
Button
Description
Cycle Count -
Reset
Resets Cycle count to zero in Batch Data field
Algorithm
Navigates to Batch Algorithm Screens
All Primary
All Primary Screen Buttons are displayed to navigate to those screens
G.
BATCH INFO.
G.1
OVERVIEW