CB Scheme
Certified to CB Scheme IEC 60950-1, Second Edition.
Laser Safety Statement
If the following label is attached to your product, it indicates the product
contains a laser engine or laser aimer:
This device has been tested in accordance with and complies with
IEC60825-1 ed2 (2007). Complies with 21 CFR 1040.10 and 1040.11,
except for deviations pursuant to Laser Notice No. 50, dated June 24,
2007.
LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PROD-
UCT, 1.0 mW MAX OUTPUT: 650nM.
Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
Patents
For patent information, please refer to www.honeywellaidc.com/patents.
Solids and Water Protection
The Granit 1910i has a rating of IP65, totally protected against dust and pro-
tected against low pressure water jets.
Warning
To reduce the possibility of heat-related injuries, avoid touching sec-
tions of the scanner that feel warm.
LASER LIGHT. DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.
1.0MW MAX OUTPUT: 650NM. IEC 60825-1 Ed 2 (2007). Complies
with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
To Next Page
Loading...
Need help?
General