Need help?Do you have a question about the Xenon 1900 and is the answer not in the manual?
General| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
|---|---|
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Connectivity | USB, RS-232, Keyboard Wedge |
| Humidity | 5% to 95% (non-condensing) |
| Connectivity Technology | Corded |
| Decode Capability | 1D and 2D barcodes |
| Light Levels | 0 to 100, 000 lux |
| Scanning Technology | Area Imager |
| Interface | USB, Keyboard Wedge, RS232, IBM 46xx (RS485) |
| Light Source | LED |
Digital device compliance with FCC Rules, operation conditions for residential installations.
UL listing for product safety, specifies compliance to UL60950-1, 2nd Edition.
Compliance of digital apparatus with Canadian ICES-003, operation subject to specific conditions.
CE marking indicates compliance with EMC, RoHS, and Low Voltage directives for European market.
Detailed specifications including dimensions, illumination, aiming, motion tolerance, voltage, current draw, and temperature ranges.
Technical specifications for cordless scanners, including radio frequency, range, data rate, battery life, and environmental tolerances.
Technical specifications for Granit corded scanners, covering dimensions, illumination, aiming, motion tolerance, and environmental ratings.
Technical specifications for Granit cordless scanners, including radio, battery, and environmental compliance details.
Overview of the User's Guide content, installation, and programming instructions for various scanner models.
Instructions for connecting the scanner to a computer via USB, Keyboard Wedge, RS232, or RS485 interfaces.
Explanation of using the view finder and aiming beam/pattern for effective bar code reading.
Programming the scanner for IBM PC AT/compatibles keyboard wedge interface with USA keyboard layout.
Configuration for connecting to a PC or terminal serial port, including baud rate and data format settings.
Programming the scanner for USB HID bar code scanners, enabling plug-and-play functionality.
Selection of the appropriate country code to program the keyboard layout for your country or language.
Explanation of adding data characters before or after scanned data to build custom message strings.
Step-by-step guide to adding prefixes and suffixes for symbologies or specific characters using Hex values.
Configuration of delays to slow data transmission for improved data integrity, addressing terminals that drop information.
Overview of using the Data Format Editor to insert characters and build custom output formats for scanned data.
Configuration to control error tones when scanned data does not match the required data format.
Saving and switching between up to four different data formats for primary or alternate use.
Configuration to enable or disable all allowable symbologies or select specific ones for decoding.
Settings for Codabar symbology, including On/Off, Start/Stop characters, and Check Character validation.
Configuration options for Code 39 symbology, including On/Off, Start/Stop characters, and Check Character validation.
Settings for Interleaved 2 of 5 symbology, covering On/Off, Check Digit, and Message Length.
Command to capture an image with modifiers for imaging style, beeper, trigger, LEDs, exposure, and gain.
Command to transmit captured images with modifiers for filters, compensation, pixel depth, file format, and image quality.
Commands to configure signature capture area size, location, and image output properties.
Temporarily enables Code I.D. transmission before decoded symbology for testing purposes.
Overview of EZConfig-Scanning software for PC-based scanner programming, firmware updates, and parameter management.
Step-by-step instructions for downloading and installing the EZConfig-Scanning utility from the Honeywell website.
Explains the conventions used for menu and query command descriptions, including syntax and parameter notation.
Details the syntax for menu commands, including prefix, tag, subtag, data, and storage table specifications.
Explains special characters used to query device settings for default, current value, or range of possible values.
Serial commands to activate and deactivate the scanner trigger, requiring the scanner to be in Manual Trigger Mode.
Detailed specifications including dimensions, illumination, aiming, motion tolerance, voltage, current draw, and temperature ranges.
Technical specifications for cordless scanners, including radio frequency, range, data rate, battery life, and environmental tolerances.
Technical specifications for Granit corded scanners, covering dimensions, illumination, aiming, motion tolerance, and environmental ratings.
Technical specifications for Granit cordless scanners, including radio, battery, and environmental compliance details.
Instructions for cleaning the scanner housing and window using approved cleaning solutions and tissues.
Guidance on checking interface cables and connectors for wear or damage that could affect scanner operation.
Procedures for replacing standard interface cables connected via a 10-pin modular connector.
Guide to diagnosing and resolving corded scanner issues, covering power, aimer, symbol reading, and data entry problems.
Contact methods for installation or troubleshooting, including Knowledge Base, Support Portal, and web form.
Information on obtaining warranty or non-warranty service through Honeywell's global service centers.
Details of the product warranty, including exclusions, limitations, and coverage duration for scanners and batteries.
Charts detailing symbology IDs, possible modifiers, and Honeywell Hex values for linear and 2D codes.
Table mapping ASCII control characters to keyboard combinations (CTRL+X) and HEX/Char values.
Information on character mapping and code page selection for displaying received data correctly.
Key maps for U.S. and European style keyboards, showing character representations for Unicode values.
To Next Page