Xenon 1900 User Manual

xi
Replacing Cables in Corded Scanners ..................... 13-2
Replacing a Xenon Interface Cable..................... 13-3
Replacing a Granit Interface Cable ..................... 13-3
Replacing Cables and Batteries
in Cordless Systems ............................................... 13-4
Replacing an Interface Cable in a Base.............. 13-4
Changing a Xenon Scanner Battery.................... 13-5
Changing a Granit Scanner Battery .................... 13-5
Troubleshooting a Corded Scanner .......................... 13-5
Troubleshooting a Cordless System ......................... 13-6
Troubleshooting a Base ...................................... 13-6
Troubleshooting a Cordless Scanner.................. 13-7
Chapter 14 - Customer Support
Technical Assistance ................................................ 14-1
Appendix A - Reference Charts
Symbology Charts.......................................................A-1
Linear Symbologies...............................................A-1
2D Symbologies ....................................................A-3
Postal Symbologies...............................................A-3
ASCII Conversion Chart (Code Page 1252) ...............A-4
Lower ASCII Reference Table ....................................A-5
ISO 2022/ISO 646 Character Replacements ............A-10
Unicode Key Maps ....................................................A-13

Xenon 1900 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Connectivity	USB, RS-232, Keyboard Wedge
Humidity	5% to 95% (non-condensing)
Connectivity Technology	Corded
Decode Capability	1D and 2D barcodes
Light Levels	0 to 100, 000 lux
Scanning Technology	Area Imager
Interface	USB, Keyboard Wedge, RS232, IBM 46xx (RS485)
Light Source	LED