Name: Xenon 1900
Brand: Xenon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

3 - 10

Off. If you want the scanner to shut down when in the base cradle, scan Shut

Down Scanner in Cradle.

Default = Scanning in Cradle On (for CCB01-

010BT)

Paging

Paging Mode

By default, the paging button on the base or Access Point pages the scan-

ners associated with that base or Access Point. If you want the paging but-

ton on your base or Access Point to be disabled, scan the Paging Mode

Off bar code, below. When Paging Mode is off, the base or Access Point

will no longer page scanners when the button is pressed. The red LED on

the base or blue LED on the Access Point will remain lit to indicate that

Paging Mode is off. (This light will go out when the button is pressed, then

back on when it’s released.)

Default = Paging Mode On.

Scanning in Cradle Off

* Scanning in Cradle On

Shut Down Scanner in Cradle

* Paging Mode On

Paging Mode Off

Questions and Answers:

Need help?

Do you have a question about the Xenon 1900 and is the answer not in the manual?

Xenon 1900 Specifications

General