1 - 1
1
Getting Started
About This Manual
This User’s Guide provides installation and programming instructions for the
Xenon™ 1900 and 1910 corded area-imaging scanners, the Xenon 1902 and
1912 cordless area-imaging scanners, and the Granit 1910i corded and 1911i
cordless industrial scanners. Product specifications, dimensions, warranty, and
customer support information are also included.
Honeywell bar code scanners are factory programmed for the most common
terminal and communications settings. If you need to change these settings,
programming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking Your Device
After you open the shipping carton containing the product, take the following
steps:
• Check for damage during shipment. Report damage immediately to the
carrier who delivered the carton.
• Make sure the items in the carton match your order.
• Save the shipping container for later storage or shipping.
To Next Page
Loading...
Need help?
General