3
Installation
This section provides instructions for installing and configuring the Smart Card solution.
There are four main installation procedures to follow in sequence:
• Hardware Installation: Unpack the Smart Card Enablement kit, then install the card reader device.
• Enabling the Smart Card: To enable the Smart Card for configuration, use the Feature Enable Key.
• Configuring the Smart Card: Enable the Smart Card function, then customize the settings.
• Using Smart Card: For instructions on how to use the card reader to access the device functions,
refer to Using Smart Card, in this guide.
3-1Xerox
®
AltaLink
®
Series
Smart Card Installation and Configuration Guide
To Next Page
Loading...
