Xerox AltaLink C8030

Hardware Installation
Connect the USB Smart Card Reader to the MFD
To install the card reader:
1. Unpack the Smart Card Enablement Kit. The kit contains the following items.
• Smart Card Enablement Guide
• Four Velcro Dual-Lock Fastener pads
• Three Cable Ties
• One Ferrite Bead
Ensure that you have read the license agreement and agree to the terms and conditions specified
before installation.
2. Locate the card reader device to install.
• There are four types of card reader available, one upright model, or three slimline models.
• Locate the device to install and ensure it is configured.
Xerox
®
AltaLink
®
Series3-2
Smart Card Installation and Configuration Guide
Installation