Xerox AltaLink C8030 - Fail Secure vs Fail Safe Principle; Pre-Boot Security Measures; Firmware Integrity and Verification

e. View the Summary screen and ensure that all settings are correct.
f. Click Close.
Configure Alternate Authentication
If Alternate Authentication is not required, refer to Configure a Security Certificate.
If Alternate Authentication is enabled, to configure the server, click Authentication Servers / Control
Panel (Alternate) - Edit in the Configuration Settings list.
a. Select Authentication Type as Kerberos from the menu.
Xerox
®
AltaLink
®
Series3-14
Smart Card Installation and Configuration Guide
Installation