feature, refer to Image Options. Follow these guidelines to control color corrections and color
adjustments:
• For best results on most paper, ensure that the color correction option in the print driver is set to
the recommended setting Xerox Automatic Color.
• To produce more vivid results, select a mode of color correction. For example, when printing
graphics in which the sky does not look blue enough, for a more vibrant blue sky, select Vivid
Color.
• To match the color output to another output device, select a custom Color Correction option.
• To apply different color corrections to text, graphics, and images, select Custom Automatic Color.
The Custom Automatic Color feature provides custom color corrections using color systems such
as RGB color, CMYK color, spot color, or CIE color.
• To adjust particular characteristics of the printed color, such as lightness, contrast, saturation, and
color casts, select Color Adjustments.
• To minimize color differences between side 1 and side 2 printed output, perform the Color
Matching procedure. For details, refer to Performing the Color-Matching Procedure.
Performing the Color-Matching Procedure
1. At the printer control panel, press the Home button.
2. Touch Device.
3. Touch Tools.
4. Touch Troubleshooting→Calibration→Color Matching→Next.
5. To run the color-matching procedure, follow the onscreen instructions.
SSoollvviinngg PPrriinntt--QQuuaalliittyy PPrroobblleemmss
Your printer is designed to produce high-quality prints consistently. If you observe print-quality
problems, use the information in this section to troubleshoot the problem. For more information, go
to www.xerox.com/office/ALC81XXsupport.
Caution: The Xerox Warranty or Service Agreement does not cover damage caused by using
unsupported paper or specialty media. For more information, contact your local Xerox
representative.
Note: To enhance the print quality, the toner cartridges, print cartridges, and drum cartridges
for many models are designed to cease functioning at a predetermined point.
Printing the Troubleshooting Print-Quality Pages
1. At the printer control panel, press the Home button.
2. Touch Device.
3. Touch Information Pages.
4. To print procedures on resolving print-quality problems, touch Troubleshooting Print Quality
Page, then touch Print.
5. Compare your print-quality problems to the examples on the pages.
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
333
Troubleshooting
To Next Page
Loading...
Need help?
General
