Xerox ColorQube 8580 User Guide

Installation and Setup
30 Xerox
®
ColorQube 8580/8880 Color Printer
User Guide
Installation and Setup Overview
Before printing, your computer and the printer must be plugged in, turned on, and connected.
The following steps provide an overview of the connection and installation steps for your printer.
1. Select a location for your printer. For details, see Selecting a Location for the Printer on page 31.
2. Modify the printer settings as needed. For details, see Modifying General Settings on page 32.
3. Choose a connection method.
4. Connect your printer to your computer with a USB cable. For details, see Connecting to a Computer
Using USB on page 35.
5. Connect your printer to a network with an Ethernet cable. For details, see Physically Connecting the
Printer to the Network on page 35.
6. For a network-connected printer, configure the network settings. For details, see Configuring
Network and Printer Settings. on page 36
7. You can install print driver software and utilities from the Software and Documentation disc. For
details, see Installing the Software on page 40.

Xerox ColorQube 8580 Specifications

General

Print Technology	Solid Ink
Print Speed (Black & Color)	Up to 51 ppm
Monthly Duty Cycle	Up to 85, 000 pages
Standard Paper Capacity	625 sheets
Duplex Printing	Automatic
First Page Out (Black & Color)	As fast as 5 seconds
Memory (Maximum)	2 GB
Connectivity	USB 2.0
PDL	PostScript 3, PDF