Scanning
24 DocuMate 152 Scanner User’s Guide
3. Check the LED number to make sure you’re using the scan
setting you want.
To choose a new scan setting, press the Function button.
4. To scan a one-sided document, press the Simplex button.
To scan a two-sided document, press the Duplex button.
A scan progress window opens and the image is sent to the
selected application from the One Touch utility. In this example
of duplex (two-sided) scanning, the Destination Application is
the PaperPort desktop and the two pages are stacked, one on
top of the other.
To Cancel scanning, click the Cancel button.
Press the Function button to cycle
through the scan settings to select the
one you want.
The current scan setting. See “Check
the Scan Settings Before Scanning”
on page 25 to check the settings.
To Next Page
Loading...
