Xerox DocuMate 152 User Manual

Scanning with the TWAIN Interface from PaperPort
84 DocuMate 152 Scanner User’s Guide
Accessing the TWAIN Interface from PaperPort
The instructions in this section are for accessing the TWAIN
interface from the PaperPort application.
To access the TWAIN interface from PaperPort:
1. On the Windows taskbar, click Start, point to Programs, point
to ScanSoft PaperPort, then click PaperPort.
The PaperPort desktop opens.
2. Click the Scan icon on the PaperPort command bar.
The Folders pane (which shows folders for organizing your
scanned images) is replaced by the Scan pane.
Scan icon Folders pane
Scan pane
If this Scan button is not active, see the
section on page 92 to setup your computer.
Click to select the
scanner.

Xerox DocuMate 152 Specifications

General

Film scanning	No
Color scanning	Yes
Grayscale levels	65536
Input color depth	24 bit
Maximum scan size	216 x 356 mm
Optical scanning resolution	600 x 1200 DPI
Flatbed scan speed (b/w, A4)	0.25 sec/page
Scanner type	Sheet-fed scanner
Product color	Gray
Sensor type	CCD
Daily duty cycle (max)	30000 pages
ISO A-series sizes (A0...A9)	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	512 MB
Minimum storage drive space	350 MB
Power supply type	-
Power consumption (standby)	6 W
Power consumption (typical)	30 W
Operating temperature (T-T)	10 - 35 °C
Package width	251.459 mm
Package height	253.999 mm
Package weight	4808.1 g

Weight and Dimensions

Depth	160 mm
Width	309 mm
Height	141 mm
Weight	2700 g