DocuMate 152 Scanner User’s Guide 75
Scanning
Scanning to Multiple Archive Folders
When archiving documents with the Transfer to Storage option,
you can scan them to multiple folders. For example, one folder
might be for “Business Receipts,” a second folder might be for
“Personal Receipts,” and a third folder might be for “Annual
Receipts.”
To scan to multiple folders, you create multiple scan configurations
with Transfer to Storage as the Destination Application, and assign
each scan configuration to one of the scanner buttons.
Setting up multiple folders for transfer to storage:
1. Using Microsoft Windows, create the folders that you want to
use for storing scanned items. Note that you can also create
the folders later while creating the new scan configurations.
2. Open the One Touch Properties window.
3. Select Transfer to Storage as the Destination Application.
4. Click the New button.
The Scan Configuration Properties dialog box opens.
NOTE: The Storage Location shown in the example above is
the default place where your scanned documents are stored if
you haven’t created any new scanning configurations or
selected a new storage location. If you create a new scan
configuration that has its own storage location and you use that
configuration to scan, your scanned documents will be stored at
the new location instead of the default. The next section,
“Scanning to Multiple Archive Folders,” shows examples of
setting up new storage locations.
Select Transfer to Storage.
Click the New button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
