Xerox DocuMate 4830 User Manual

Xerox DocuMate 4830
User’s Guide
10
Electrical Information
Warning - Electrical Safety Information
1. The power receptacle for the machine must meet the requirements stated on the data plate on the rear of the
machine. If you are not sure that your electrical supply meets the requirements, please consult your local
power company or an electrician for advice.
2. The socket outlet shall be installed near the equipment and shall be easily accessible.
3. Use the power cable that is supplied with your machine. Do not use an extension cord or remove or modify the
power cord plug.
4. Plug the power cable directly into a correctly grounded electrical outlet. If you are not sure whether or not an
outlet is correctly grounded, consult an electrician.
5. Do not use an adapter to connect any Xerox equipment to an electrical outlet that lacks a ground connection
terminal.
6. Do not place this equipment where people might step or trip on the power cable.
7. Do not place objects on the power cable.
8. Do not override or disable electrical or mechanical interlock devices.
9. Do not push objects into slots or openings on the machine. Electrical shock or fire may result.
Electrical Supply
• This product shall be operated from the type of electrical supply indicted on the product’s data
plate label. If you are not sure that your electrical supply meets the requirements, please consult
your local power company for advice.
• Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
checked by a qualified electrician.
Warning: This equipment must be connected to a protective earth circuit. This equipment is supplied with a plug
that has a protective earth pin. This plug will only fit into an earthed electrical outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact your electrician to replace the outlet.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a plug-in
device. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet.

Xerox DocuMate 4830 Specifications

General

Film scanning	-
Color scanning	Yes
Maximum scan size	297 x 2997 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	50 ppm
ADF scan speed (color, A4)	30 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	100 ipm
Duplex ADF scan speed (color, A4)	60 ipm
Scanner type	Flatbed & ADF scanner
Product color	Blue, Grey
Built-in display	No
Sensor type	CIS
Scan drivers	ISIS, TWAIN, WIA
Daily duty cycle (max)	3000 pages
Auto document feeder (ADF) input capacity	75 sheets
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	75 - 80 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Input voltage	100-240 V
Power supply type	AC
Power consumption (standby)	15 W
Power consumption (typical)	30 W
Minimum RAM	2048 MB
Minimum storage drive space	350 MB
Cables included	AC, USB
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	499 mm
Width	581 mm
Height	194 mm
Weight	12000 g