Xerox DocuMate 4830 User Manual

Xerox DocuMate 4830
User’s Guide
132
Using the Preview Window
Clicking the Preview button will display the preview window for the scanner interface. Use the preview option if you
want to scan and display a sample image that reflects the current settings in the main interface. After the preview is
displayed, you can then adjust the settings in the main interface until you are happy with how the sample image
looks. The preview window is also where you can define custom scan regions. Please refer to Scan Regions for
instructions on creating and scanning custom regions.
To use the preview window:
1. Select the initial scan settings you want to use for the preview image and scanning.
If you want to modify the settings for a particular preset, make sure you select that preset before continuing.
2. Click the Preview button to open the preview window.
The preview window displays the scan area and the current scan region. This scan region reflects the paper size
currently selected in the main interface. When you pass the mouse cursor over the scan region it will highlight
for you to move or resize it. If you move, resize, or add scan regions the main interface will display User
defined for the page size. Please refer to Scan Regions for instructions on creating, resizing and deleting
regions.
3. Place an item in the scanner.
4. Click the Get preview button.

Xerox DocuMate 4830 Specifications

General

Film scanning	-
Color scanning	Yes
Maximum scan size	297 x 2997 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	50 ppm
ADF scan speed (color, A4)	30 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	100 ipm
Duplex ADF scan speed (color, A4)	60 ipm
Scanner type	Flatbed & ADF scanner
Product color	Blue, Grey
Built-in display	No
Sensor type	CIS
Scan drivers	ISIS, TWAIN, WIA
Daily duty cycle (max)	3000 pages
Auto document feeder (ADF) input capacity	75 sheets
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	75 - 80 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Input voltage	100-240 V
Power supply type	AC
Power consumption (standby)	15 W
Power consumption (typical)	30 W
Minimum RAM	2048 MB
Minimum storage drive space	350 MB
Cables included	AC, USB
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	499 mm
Width	581 mm
Height	194 mm
Weight	12000 g